Wait untill the flashing process is 100% complete then click disconnect and then disconnect and unplug your box from the pc. It takes about 12 minutes for a dm500 to flash the box ,and when the box has been flashed you should see this now you will be asked if you want to perform a flash erase (you say no )and your box should start flashing now and will look like this ,when you find the image click on it and then click either open or press enter and you will be returned to dreamup. Now plug in the dreambox and in the log box it should say box type in this case dm500Īnd also box is alive and speaking ,(this is the point if com1 is the wrong com port that no info will appear in the log box so then try com2 etc ) now click on flash and you will be directed to browse your pc for the image you downloaded what you see should look a little like this ok now click on connect (you should see connection prepared now switch on dreambox ) The first thing you set is com port(this is the port where the null modem cable is connected) some pcs have more than one port so it may have options com1 and com2 etc ,i would start at com1.
Ok connect the dreambox to your pc via the null modem cable (leave the box unplugged ) and then go to your pc and open dreamup,this is what you should see please note that some pictures in this tutorial may not exactly display what you see on your screen but they should be reasonably close ,for instance in the pictures of dreamup below you will see dreamup 1.3.3.5 and a mention of a dm500s hd ,dont worry about these as on the whole the process for using dreamup and dream control center is exactly same on all dreambox models.
you should be able to download the image and dreamup from the link in my signature area and lots more dreambox tools. the items you need to flash your box are an image (i suggest nabilo maxvar v8 which is available from link number 1 of my signature area) ,and you will need a loader called dreamup (the loader sends the image into the box,its available from the same link ) and you will need a null modem cable to connect the box to your pc.
The first thing to do with any box is to flash it with a good image (this is the tv software ) and also the image needs to be clone safe (if your box is a clone )so the images to be carefull with are gemini images as some have a bomb or clone killer ,the dm500s is no longer made so any new dm500s bought these days are clones.
0 kommentar(er)
